Four high-performance external antennas help the Archer VR2600 create a strong, far-reaching network for your home. Beamforming technology further improves the router's coverage by helping it locate wireless devices to form stronger, more reliable connections, even with mobile devices moving from room to room.
With MU-MIMO technology, the Archer VR2600 is able to serve multiple connected devices simultaneously. It reduces wait-time for all clients by making better use of the unoccupied wireless capacity.
With multiple inputs, the Archer VR2600 provides you with a variety of options when connecting to the Internet. As a backup, both of the two USB ports support 3G/4G dongle connections. Additionally, the WAN port allows the Archer VR2600 to accept connections from cable and fiber modems via Ethernet cable.
| Archer VR2600 Features | |
| General | |
| Availability: | end of life |
| LAN / WAN Connectivity | |
| WAN ports: |
1 one 10/100/1000 Base-T WAN port and two USB ports for 3G/4G modems |
| WAN port(s) type: | DSL/ISDN/POTS connector (RJ-11) |
| WAN port auto cross-over: |
 |
| LAN ports: | 4 |
| LAN ports type: | Gigabit Ethernet (RJ-45) |
| LAN ports auto cross-over: |
|
| USB port(s): |
2 for printers, storage devices and 3G/4G USB modems |
| USB port type: | USB 3.0 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) IGMP Multicast (RFC 1112) |
| DSL | |
| DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) RE-ADSL2 (G.992.3 Annex L) ADSL2+ (G.992.5) VDSL (G.993.1) VDSL2 (G.993.2) |
| PPPoE client: |
|
| PPPoA client: |
|
| Wireless | |
| Maximum Wireless Speed: | 2600 Mbps (Wi-Fi 5) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) 802.11ac (Wi-Fi 5) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Wireless bridge (PtP) |
| external antenna(s): | 4 |
| ext antenna(s) removable ?: |
|
| Antenna gain: | 3 dBi |
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| MU-MIMO: |
|
| Beamforming: |
|
| Dual Band (2.4GHz/5GHz): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| IPSec simultaneous tunnels: | 10 |
| L2TP | |
| L2TP passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| Filtering: | Domain/URL blocking, IP Address filtering, MAC Address filtering |
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Alternate Admin URL: | http://tplinkmodem.net |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Telnet / CLI |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Usage Statistics: |
|
| Diagnostic functions: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.1, SNMP v.2 |
| IPv6 support: |
|
| Print Server: |
|
| Links | |
| Product page: | http://www.tp-link.com/en/products/detai... |
| Datasheet: | http://www.tp-link.com/res/down/doc/Arch... |
| Quick Install Guide: | http://www.tp-link.com/res/down/doc/Arch... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|