speedguide.net  

SparkLAN WRTR-505N

details: 802.11n Dual-Band Router
hardware type: Wireless Router
date added: 2010-01-13
updated: 2020-03-23
The WRTR-505N is a Dual Band wireless router with one 10/100Base-T WAN port and four 10/100Base-T LAN ports. It supports 2.4GHz or 5GHz radio bands and works with dual-band (2.4GHz or 5GHz) 802.11n wireless devices as well as 802.11a/b/g products, providing you the flexibility to choose 2.4GHz band for checking e-mails and browsing the Internet or 5GHz, the clean wireless network, for streaming multimedia data or transmitting a large number of data.

This router integrates MIMO (Multiple In, Multiple Output) technology that can use signal reflections to increase the range and reduce "dead spots" of wireless coverage area. It supports multi-operation modes: AP, AP Client (Station Infrastructure), Bridge, WDS, and WISP.

The integrated AP supports WEP and WPA/WPA2 wireless encryption. It uses WMM (QoS) to prioritize the traffic over the network. A WPS button allows for worry-free wireless security configuration.

The WRTR-505N provides VPN pass-through for IPSec and PPTP. It features a built-in firewall to protect the network against Denial of Service (DoS) attacks. It can be easily configured via Web-based configuration utility, including a Quick Setup Wizard.
 
 
 
 WRTR-505N Features
 General
 Availability: discontinued
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: 10/100 Base-TX (RJ-45)
 WAN port auto cross-over: yes
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port triggering: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 QoS: yes
 Wireless
 Maximum Wireless Speed: 300 Mbps (Wi-Fi 4)
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11a (Wi-Fi 2)
802.11g (Wi-Fi 3)
802.11n (draft 2.0)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
 WiFi modes: Access point
Wireless client
Wireless bridge (PtP)
Repeater mode
 external antenna(s): 2
 ext antenna(s) removable ?: no
 Antenna gain: 3 dBi
 Transmit Power: +14 dBm
 Receiver Sensitivity: -74 dBm
 WDS compatible: yes
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 Dual Band (2.4GHz/5GHz): yes
 VPN
  IPSec
 IPSec passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 DoS / DDoS protection: yes
 Device Management
 Default IP address: 192.168.1.1
 Default admin username: (blank)
 Default admin password: admin
 Administration: Web-based (LAN)
Remote configuration (WAN)
 Firmware upgradeable: yes
 Links
 Product page: http://www.sparklan.com/

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About