speedguide.net  

Planet WNRT-300

details: 150Mbps 802.11n Wireless Portable AP/Router
hardware type: Wireless Router
date added: 2011-11-17
updated: 2012-09-03
The WNRT-300 features 802.11n radio with 1T1R antenna technology compliant with 802.11b/g/n standards. It can operate in various environments with the hardware switch modes including AP, Router and Client.

The router is equipped with one 10/100Mbps RJ-45 Ethernet port for LAN/WAN, Auto MDI/MDI-X supported. The WNRT-300 has one built-in rechargeable Li-ion battery and its power supplied through mini USB interface.

In order to simplify security settings for home and SOHO network, the WNRT-300 supports Wi-Fi Protected Setup (WPS) with configuration in PBC and PIN type. To secure the wireless communication, the WNRT-300 supports most up-to-date encryptions including WPA/WPA2-PSK with TKIP/AES.
 
 
 
 WNRT-300 Features
 General
 Availability: currently available
 LAN / WAN Connectivity
 LAN ports: 1
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 UPnP: yes
 Routing Protocols: RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
Spanning Tree Protocol (STP)
VLAN tagging (802.1q)
IGMP Multicast (RFC 1112)
 Wireless
 Maximum Wireless Speed: 150 Mbps (Wi-Fi 4)
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
 WiFi modes: Access point
Wireless client
Repeater mode
 internal antenna(s): 1
 Antenna gain: 2 dBi
 Transmit Power: +20 dBm
 Receiver Sensitivity: -68 dBm
 Multiple SSID: yes
 WDS compatible: yes
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 VPN
  IPSec
 IPSec passthrough: yes
  L2TP
 L2TP passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Filtering: Domain/URL blocking, IP Address filtering, MAC Address filtering
 Device Management
 Default IP address: 192.168.1.1
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Usage Statistics: yes
 Misc hardware info
 NTP client: yes
 USB power cable: yes
 Links
 Product page: http://www.planet.com.tw/en/product/prod...
 Datasheet: http://www.planet.com.tw/en/product/imag...
 Manual: http://www.planet.com.tw/en/product/imag...
 Quick Install Guide: http://www.planet.com.tw/en/product/imag...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About