hAP provides PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.
The hAP is preconfigured, so all you need to do, is plug in the internet cable, the power, and start using the internet by connecting to the MikroTik network.
| RB951Ui-2nD Features | |
| General | |
| Availability: | currently available |
| List price: | $45 |
| LAN / WAN Connectivity | |
| WAN ports: |
1 one USB port for 3G/4G USB modem |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
|
| USB port(s): |
1 for 3G/4G USB modem |
| USB port type: | USB 2.0 |
| Router | |
| DHCP client: |
|
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: | Access point |
| Transmit Power: | +18 dBm |
| Receiver Sensitivity: | -74 dBm |
| WPS (Wi-Fi Protected Setup): |
|
| Device Management | |
| Default IP address: | 192.168.88.1 |
| Default admin username: | admin |
| Default admin password: | n/a |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Misc hardware info | |
| Chipset: | QCA9531, 650Mhz |
| RAM: | 64 Mb |
| Power over Ethernet (PoE): |
|
| Links | |
| Product page: | http://routerboard.com/RB951Ui-2nD |
| Datasheet: | http://www.speedguide.net/images/hardwar... |
| Quick Install Guide: | http://www.speedguide.net/images/hardwar... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|