A-WA2620 Features |
General
|
Availability: |
currently available
|
Street price: |
$581 |
Warranty: |
1 year(s) |
LAN / WAN Connectivity
|
WAN ports: |
0 |
LAN ports: |
1 |
LAN ports type: |
Gigabit Ethernet (RJ-45)
|
LAN ports auto cross-over: |
|
Router
|
DHCP client: |
|
QoS: |
|
ToS / DiffServ: |
|
Wireless
|
Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP)
|
WiFi modes: |
Access point
|
internal antenna(s): |
6 |
external antenna(s): |
3 |
ext antenna(s) removable ?: |
|
Antenna connector: |
RP-SMA (Reverse SMA)
|
Antenna gain: |
4 dBi |
Transmit Power: |
+17 dBm |
Receiver Sensitivity: |
-76 dBm |
WMM (QoS): |
|
Dual Band (2.4GHz/5GHz): |
|
Simultaneous Dual Band (2.4GHz/5GHz): |
|
Device Management
|
Default IP address: |
192.168.0.50 |
Default admin username: |
admin |
Default admin password: |
h3capadmin |
Administration: |
Web-based (LAN)
|
Firmware upgradeable: |
|
Diagnostic functions: |
ping, traceroute |
Misc hardware info
|
Chipset: |
Atheros, 600 MHz |
RAM: |
128 Mb |
Flash Memory: |
16 Mb |
Max clients: |
64 |
SNMP support: |
SNMP v.1, SNMP v.2, SNMP v.3
|
IPv6 support: |
|
NTP client: |
|
Power over Ethernet (PoE): |
|
Notes: |
The AP features an additional RJ-45 console port, used for management. |
Links
|
Product page: |
http://h10010.www1.hp.com/wwpc/us/en/sm/... |
Manual: |
http://bizsupport2.austin.hp.com/bc/docs... |
Quick Install Guide: |
http://bizsupport2.austin.hp.com/bc/docs... |