battery and support for a USB 3G/4G modem or Smart Phone. The incoming connection is then shared via an 802.11n wireless network or via the built-in 10/100 port. The Ethernet LAN/WAN port can be used as a primary or backup Internet connection.
Simply insert a compatible 3G/4G USB adapter or Smart Phone and share your Mobile Internet connection through a secure, high-speed wireless network. A 10/100 Ethernet LAN/ WAN port allows you to attach a DSL/Cable modem as the primary or backup link, while auto-failover ensures an uninterrupted connection by automatically connecting to your 3G network or WAN whenever the primary link is lost.
The router provides firewall security using Stateful Packet Inspection (SPI) and hacker attack logging for Denial of Service (DoS) attack protection. SPI inspects the contents of all incoming packet headers before deciding what packets are allowed to pass through. Router access control is provided with packet filtering based on port and source/destination MAC/IP addresses.
| DWR-161 Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 3G/4G USB port |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Auto-failover connection: |
|
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| UPnP: |
|
| Wireless | |
| Maximum Wireless Speed: | 150 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: | Access point |
| internal antenna(s): | 1 |
| WPS (Wi-Fi Protected Setup): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| L2TP | |
| L2TP passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: | Domain/URL blocking, IP Address filtering, MAC Address filtering |
| Device Management | |
| Default IP address: | 192.168.0.1 |
| Default admin username: | admin |
| Default admin password: | (blank) |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Misc hardware info | |
| USB power cable: |
|
| Links | |
| Product page: | http://www.dlink.com.au/products/?pid=95... |
| Datasheet: | http://files.dlink.com.au/Products/DWR-1... |
| Quick Install Guide: | http://files.dlink.com.au/Products/DWR-1... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|