Dual Ethernet ports allow the access point to use link aggregation to bond 100Mbps links or to ensure reliability with redundant links. This allows the performance advantage of dual radio 802.11n to be seen even when connected through legacy 10/100 switches.
When connected to two separate switches, the dual links can be used for redundant data connectivity in case one of the switches fails. The AP320 also features Smart Power over Ethernet (PoE), which allows operation at standard 802.3af as well as at 802.3at specs to provide additional deployment functionality.
| AP320 Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 2 |
| LAN ports type: | Gigabit Ethernet (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| DHCP client: |
|
| ToS / DiffServ: |
|
| Wireless | |
| Maximum Wireless Speed: | 600 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) |
| WiFi modes: | Access point |
| internal antenna(s): | 6 |
| Antenna gain: | 2 dBi |
| Transmit Power: | +20 dBm |
| Receiver Sensitivity: | -83 dBm |
| Multiple SSID: |
|
| WMM (QoS): |
|
| WMM-PS (QoS): |
|
| Dual Band (2.4GHz/5GHz): |
|
| Simultaneous Dual Band (2.4GHz/5GHz): |
|
| Device Management | |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Misc hardware info | |
| Power over Ethernet (PoE): |
|
| Notes: | This AP features one serial RJ-45 port |
| Links | |
| Product page: | http://www.aerohive.com/products/access-... |
| Datasheet: | http://www.aerohive.com/pdfs/Aerohive_Da... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|