The new wireless 11n technology can support the data rates up to 300Mbps for 11n wireless clients.
The 200M data rates for powerline network allows for high quality video, audio data streaming. The 128 bit AES encryption ensuring that your network communications is safe from hackers. Easy to install and use, it plugs straight in to any existing wall electrical socket while having a low power consumption.
| NPL200/Y Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 3 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Powerline Networking: | HomePlug AV (200Mbps, 128-bit AES) |
| Router | |
| DHCP client: |
|
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft 2.0) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Wireless client Repeater mode |
| external antenna(s): | 3 |
| ext antenna(s) removable ?: |
|
| Transmit Power: | +17 dBm |
| Receiver Sensitivity: | -75 dBm |
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| Device Management | |
| Default IP address: | 192.168.16.168 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Event log: |
|
| Usage Statistics: |
|
| Diagnostic functions: |
|
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|