Shortcuts
|
 |
Minitar MWNAPR-1
|
| details: | 802.11n Wireless LAN Broadband Router |
| hardware type: | Wireless Router |
| date added: | 2012-12-17 |
| updated: | 2020-03-01 |
The Minitar MWNAPR-1 is a reliable IEEE 802.11n wireless router, supporting data rate of up to 300Mbps.
With its integrated WAN interface for DSL or cable modems, and built-in NAT, multiple PCs and devices can share one internet connection. The router supports some advanced additional features, such as advanced MIMO technology and VPN passthrough.
| MWNAPR-1 Features |
| General
|
| Availability: |
discontinued
|
| LAN / WAN Connectivity
|
| WAN ports: |
1
|
| WAN port(s) type: |
10/100 Base-TX (RJ-45)
|
| WAN port auto cross-over: |
 |
| LAN ports: |
4 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| Wireless
|
| Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (draft 2.0)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
|
| WiFi modes: |
Access point
|
| external antenna(s): |
3 |
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN
|
| |
IPSec |
| IPSec passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| Firewall
|
| DoS / DDoS protection: |
|
| Device Management
|
| Administration: |
Web-based (LAN)
Remote configuration (WAN)
|
| Firmware upgradeable: |
|
| Event log: |
|
| Misc hardware info
|
| Chipset: |
Ralink RT2880 |
| RAM: |
16 Mb |
| Flash Memory: |
4 Mb |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
