The Broadband Guide
SG
search advanced

Loopcomm LP-9696C

details: High Power 802.11 b/g/n Indoor Wireless AP Router(2T2R)
hardware type: Wireless Router
date added: 2014-06-11
updated: 2014-09-22
The LP-9696C is a high power (600mW) wireless router that complies with 2.4GHz IEEE802.11b/g/n standards and supports up to 300Mbps downstream and upstream. It features Low Noise Amplifier(LNA) support along with 20MHz and 40 MHz bandwidth support.

The device can work in the following operating modes: Access Point, Wireless Bridge, Wireless Client, WISP, Gateway. VPN pass-through is also supported.

The LP-9696C features a WPS hardware button. WMM (QoS) prioritizes the traffic over the network giving higher priority to bandwidth-intensive applications. Denial of Service protection is also provided.
 
 
 
 LP-9696C Features
 General
 Availability: currently available
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: 10/100 Base-TX (RJ-45)
 WAN port auto cross-over: yes
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 QoS: yes
 Routing Protocols: VLAN tagging (802.1q)
 Wireless
 Maximum Wireless Speed: 300 Mbps (Wi-Fi 4)
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
 WiFi modes: Access point
Wireless client
Wireless bridge (PtP)
WISP mode
 external antenna(s): 2
 ext antenna(s) removable ?: yes
 Antenna connector: RP-SMA (Reverse SMA)
 Antenna gain: 7 dBi
 Transmit Power: +21 dBm
 Receiver Sensitivity: -90 dBm
 Multiple SSID: yes
 WDS compatible: yes
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 VPN
  L2TP
 L2TP passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 DoS / DDoS protection: yes
 Filtering: Domain/URL blocking, IP Address filtering, MAC Address filtering
 Device Management
 Default IP address: 192.168.1.254
 Default admin username: (blank)
 Default admin password: (blank)
 Administration: Web-based (LAN)
Quick Setup Wizard
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Usage Statistics: yes
 Misc hardware info
 Chipset: Realtek RTL8198C
 NTP client: yes
 Links
 Product page: http://www.loopcomm.com/front/bin/ptdeta...
 Datasheet: http://www.loopcomm.com/ezcatfiles/loopc...
 Manual: http://www.loopcomm.com/ezcatfiles/loopc...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About