| L-54g Features |
| General
|
| Availability: |
currently available
|
| LAN / WAN Connectivity
|
| LAN ports: |
1 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| DNS proxy: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| ToS / DiffServ: |
|
| Transparent Bridging (IEEE 802.1d): |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
Spanning Tree Protocol (STP)
VLAN tagging (802.1q)
IGMP Multicast (RFC 1112)
|
| Wireless
|
| Maximum Wireless Speed: |
108 Mbps
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11g+ (108 Mbps+)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
RADIUS authentication
|
| WiFi modes: |
Access point
Wireless client
Wireless bridge (PtP)
|
| external antenna(s): |
2 |
| Multiple SSID: |
|
| WMM (QoS): |
|
| WMM-PS (QoS): |
|
| Firewall
|
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: |
Domain/URL blocking, IP Address filtering, MAC Address filtering, packet filtering
|
| Device Management
|
| Default IP address: |
'172.23.56.254 |
| Administration: |
Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
Telnet / CLI
TFTP (RFC 1350)
|
| Firmware upgradeable: |
|
| Email alerts: |
|
| Event log: |
|
| Usage Statistics: |
|
| Diagnostic functions: |
ping, traceroute |
| Misc hardware info
|
| SNMP support: |
SNMP v.2
|
| NTP client: |
|
| Power over Ethernet (PoE): |
|
| Notes: |
This AP features an additional COM port, allowing remote management via Telnet/CLI. |
| Links
|
| Product page: |
http://www.lancom-systems.de/en/products... |
| Datasheet: |
http://www.lancom-systems.de/fileadmin/p... |
| Manual: |
ftp://ftp.lancom.de/T-Systems-Releases/T... |
