Lancom L-322agn Wireless Access Point

Shortcuts

	Lancom L-322agn
details:	802.11n Dual Band Access Point
hardware type:	Wireless Access Point
date added:	2010-05-27
updated:	2013-04-08

The LANCOM L-322agn is a High Speed Dual Radio and Dual Band Access Point. With its two 11n radio modules it operates simultaneously in 2.4 and 5 GHz and can be connected to Gigabit Ethernet as well as to Fast Ethernet networks.

The L-322agn features one 10/100Base-T LAN port and one 10/100/1000Base-T LAN port. The LAN ports can (even parallel to LAN mode) be used as a WAN port for connecting external DSL modems (PPPoE) or external routers. This AP provides flexible power supply either via adapter or 802.3af PoE.

The LANCOM L-322agn works as a standalone Access Point which can be managed by a LANCOM WLAN Controller as well. It can operate in Wireless Client, Wireless Bridge and Router modes.

MIMO technology uses multiple antennas at both the transmitter and receiver to transmit multiple spatial streams. The multiple transmit streams which take different routes in
reflecting environments are combined at the receiver using MIMO techniques. The end result is a two-fold increase in throughput and improved wireless coverage due to lesser
deadspots.

All Lancom products

All Wireless Access Points

L-322agn Features
General
Availability:	currently available
Warranty:	3 year(s)
LAN / WAN Connectivity
WAN ports:	0
LAN ports:	2
LAN ports type:	Gigabit Ethernet (RJ-45)
Router
NAT routing:
Multihomed:
Port forwarding:
DHCP server:
DHCP client:
Dynamic DNS client:
QoS:
ToS / DiffServ:
Transparent Bridging (IEEE 802.1d):
Routing Protocols:	RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) Spanning Tree Protocol (STP) VLAN tagging (802.1q) IGMP Multicast (RFC 1112)
Wireless
Maximum Wireless Speed:	300 Mbps (Wi-Fi 4)
WiFi standards supported:	802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4)
Wifi security/authentication:	WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP)
WiFi modes:	Access point Wireless client Wireless bridge (PtP)
external antenna(s):	4
ext antenna(s) removable ?:
Antenna connector:	RP-SMA (Reverse SMA)
Antenna gain:	3 dBi
Receiver Sensitivity:	-80 dBm
Multiple SSID:
WMM (QoS):
WMM-PS (QoS):
Dual Band (2.4GHz/5GHz):
Simultaneous Dual Band (2.4GHz/5GHz):
Firewall
SPI firewall:
DoS / DDoS protection:
Security log:
Filtering:	Domain/URL blocking, IP Address filtering, MAC Address filtering, packet filtering
Device Management
Default IP address:	172.23.56.254
Administration:	Web-based (LAN) Quick Setup Wizard Telnet / CLI SSH SSL secure web TFTP (RFC 1350)
Firmware upgradeable:
Email alerts:
Event log:
Usage Statistics:
Misc hardware info
SNMP support:	SNMP v.2
NTP client:
Power over Ethernet (PoE):
Notes:	This AP features and additional COM port, allowing remote management via Telnet/CLI.
Links
Product page:	http://www.lancom-systems.de/en/products...
Datasheet:	http://www.lancom-systems.de/fileadmin/p...
Manual:	ftp://ftp.lancom.de/LANCOM-Releases/LC-L...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please

Post your review/comments

rate: avg: