Shortcuts
|
 |
Hitron CODA-5810
|
| details: | DOCSIS 3.1 AX6000 Cable Router |
| hardware type: | Cable Gateway |
| date added: | 2021-09-24 |
| updated: | 2021-10-09 |
The CODA-5810 supports DOCSIS 3.1 - up to 10 Gbps downstream.
A software switchable return path lets you easily support upstream bandwidth needs today and tomorrow. Upgrade to the high-split (5-204MHz) return path to meet the increased upstream bandwidth demands of video conferencing, IoT and interactive services. And since its software is switchable, you can cost-effectively upgrade customers to higher-tier upstream speeds without swapping out hardware or sending out a technician.
With Wi-Fi 6 you get four times more device capacity. Greater coverage and rock-solid performance. The CODA-5810 has an integrated WiFi 4×4 2.4GHz 802.11ax and 4×4 5GHz 802.11ax dual band MU-MIMO access point for fast coverage for all your smart home, gaming, mobile and media devices. And pair the CODA-5810 with Hitron extenders/mesh pods to gain extra coverage.
The CODA-5810 makes installation a snap. It supports pre-configured and pre-enabled WiFi security via WiFi Protected Setup (WPS), so end users can easily setup a secure wireless network without any manual configuration. Support for SNMP, TR-069 and HNAP gives you complete remote management and troubleshooting capabilities. And, the CODA-5810 comes with MyHitron (a mobile application that lets end users manage their network) and HitronCloud management and analytics for service providers.
| CODA-5810 Features |
| General
|
| Availability: |
not sold retail
|
| LAN / WAN Connectivity
|
| WAN throughput: |
10240 Mbps
|
| WAN throughput upstream: |
1024 Mbps
|
| WAN ports: |
1
|
| WAN port(s) type: |
Coax F-connector
|
| LAN ports: |
3 |
| LAN ports type: |
Gigabit Ethernet (RJ-45)
|
| LAN ports auto cross-over: |
 |
| USB port(s): |
1
for client devices |
| USB port type: |
USB 3.0
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DHCP server: |
|
| DHCP client: |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
|
| Cable Modem
|
| DOCSIS compliance: |
DOCSIS 3.0
DOCSIS 3.1
|
| DOCSIS channels (down x up): |
32x8 (1216 Mbit/s)
|
| Wireless
|
| Maximum Wireless Speed: |
6000 Mbps (Wi-Fi 6)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11a (Wi-Fi 2)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
802.11ac (Wi-Fi 5)
802.11ax (Wi-Fi 6)
|
| Wifi security/authentication: |
WPA (TKIP)
WPA2 (AES)
WPA3
|
| WiFi modes: |
Access point
|
| Multiple SSID: |
|
| WMM (QoS): |
|
| WMM-PS (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| MU-MIMO: |
|
| Dual Band (2.4GHz/5GHz): |
|
| Simultaneous Dual Band (2.4GHz/5GHz): |
|
| Firewall
|
| SPI firewall: |
|
| Intrusion Detection System (IDS): |
|
| Filtering: |
MAC Address filtering
|
| Device Management
|
| Administration: |
Web-based (LAN)
SSH
TFTP (RFC 1350)
|
| Firmware upgradeable: |
|
| Diagnostic functions: |
|
| Misc hardware info
|
| SNMP support: |
SNMP v.1, SNMP v.2
|
| IPv6 support: |
|
| Links
|
| Product page: |
https://us.hitrontech.com/products/servi... |
| Datasheet: |
https://us.hitrontech.com/wp-content/upl... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
