| NCB-8610 Features |
| General
|
| Availability: |
discontinued
|
| LAN / WAN Connectivity
|
| WAN ports: |
0
|
| LAN ports: |
1 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| DHCP server: |
|
| DHCP client: |
|
| Wireless
|
| Maximum Wireless Speed: |
54 Mbps
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11a (Wi-Fi 2)
802.11g (Wi-Fi 3)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
|
| WiFi modes: |
Access point
Wireless client
Wireless bridge (PtP)
Multipoint bridge (PtMP)
|
| external antenna(s): |
1 |
| Antenna connector: |
RP-TNC (Reverse TNC)
|
| Transmit Power: |
+21 dBm |
| Receiver Sensitivity: |
-74 dBm |
| WDS compatible: |
|
| Device Management
|
| Default IP address: |
192.168.1.1 |
| Default admin username: |
(blank) |
| Default admin password: |
(blank) |
| Administration: |
Web-based (LAN)
Quick Setup Wizard
Telnet / CLI
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info
|
| SNMP support: |
SNMP v.1
|
| Power over Ethernet (PoE): |
|
| Links
|
| Product page: |
http://www.senao.com/English/Default.asp... |
| Datasheet: |
http://www.speedguide.net/images/hardwar... |
| Manual: |
http://www.speedguide.net/images/hardwar... |
