The Broadband Guide
SG
search advanced

EnGenius / Senao EOA7530

details: Wireless 802.11a/b/g Dual Band AP
hardware type: Wireless Access Point
date added: 2010-09-10
updated: 2020-03-30
The EOA7530 is a simultaneous Dual Band (2.4GHz/ 5GHz) outdoor Wireless Access point/Client Bridge/Client Router. Operating in two bands it provides a total of 8 working modes: AP-AP, AP-CB, AP-CR, CB-AP, CR-AP, AP Concurrent, CB Concurrent, CR Concurrent.

The integrated AP complies with IEEE 802.11a/b/g standards, providing wireless transmission speeds of up to 54Mbps. It is WDS compatible and uses WMM (QoS) to prioritize the traffic over the network.

This device can act as a DHCP client/server. It provides VPN pass-through for IPSec and PPTP. The EOA7530 can be easily configured via Web-based configuration utility or via SNMP v.1/ v.2.
 
 
 
 EOA7530 Features
 General
 Availability: discontinued
 Street price: $306
 LAN / WAN Connectivity
 WAN ports: 0
 LAN ports: 1
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DHCP server: yes
 DHCP client: yes
 Routing Protocols: VLAN tagging (802.1q)
 Wireless
 Maximum Wireless Speed: 54 Mbps
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11a (Wi-Fi 2)
802.11g (Wi-Fi 3)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
 WiFi modes: Access point
Wireless client
Wireless bridge (PtP)
Multipoint bridge (PtMP)
Repeater mode
 external antenna(s): 2
 Antenna connector: N-type
 Transmit Power: +24 dBm
 Receiver Sensitivity: -74 dBm
 Multiple SSID: yes
 WDS compatible: yes
 WMM (QoS): yes
 Dual Band (2.4GHz/5GHz): yes
 Simultaneous Dual Band (2.4GHz/5GHz): yes
 VPN
  IPSec
 IPSec passthrough: yes
  PPTP
 PPTP passthrough: yes
 Device Management
 Default IP address: 192.168.1.2
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Remote configuration (WAN)
Telnet / CLI
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Usage Statistics: yes
 Diagnostic functions: yes
ping
 Misc hardware info
 Chipset: Atheros AR7161
 RAM: 64 Mb
 Flash Memory: 8 Mb
 SNMP support: SNMP v.1, SNMP v.2
 NTP client: yes
 Links
 Product page: http://www.senao.com/English/Default.asp...
 Datasheet: http://www.senao.com/images/www.senao.co...
 Manual: http://www.senao.com/images/www.senao.co...
 Quick Install Guide: http://www.senao.com/images/www.senao.co...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About