|
Port 9600 Details
known port assignments and vulnerabilities
threat/application/port search:
| Port(s) |
Protocol |
Service |
Details |
Source |
| 9600 |
udp |
micromuse-ncpw |
IANA registered for MICROMUSE-NCPW
Factory Interface Network Service (FINS), a network protocol used by Omron programmable logic controllers |
SG
|
| 9600 |
tcp |
applications |
The Omron SYSMAC Cx product family PLCs (CS series, CJ series, and CP series) through 2022-05-18 lack cryptographic authentication. They utilize the Omron FINS (9600/TCP) protocol for engineering purposes, including downloading projects and control logic to the PLC. This protocol has authentication flaws as reported in FSCT-2022-0057. Control logic is downloaded to PLC volatile memory using the FINS Program Area Read and Program Area Write commands or to non-volatile memory using other commands from where it can be loaded into volatile memory for execution. The logic that is loaded into and executed from the user program area exists in compiled object code form. Upon execution, these object codes are first passed to a dedicated ASIC that determines whether the object code is to be executed by the ASIC or the microprocessor. In the former case, the object code is interpreted by the ASIC whereas in the latter case the object code is passed to the microprocessor for object code interpretation by a ROM interpreter. In the abnormal case where the object code cannot be handled by either, an abnormal condition is triggered and the PLC is halted. The logic that is downloaded to the PLC does not seem to be cryptographically authenticated, thus allowing an attacker to manipulate transmitted object code to the PLC and either execute arbitrary object code commands on the ASIC or on the microprocessor interpreter.
References:[CVE-2022-31207] |
SG
|
| 9600 |
tcp,udp |
micromuse-ncpw |
MICROMUSE-NCPW |
IANA
|
|
3 records found
|
jump to:
 |
« back to SG Ports
External Resources
SANS ISC: port 9600
Notes:
Port numbers in computer networking represent communication endpoints. Ports are unsigned 16-bit integers (0-65535) that identify
a specific process, or network service. IANA is responsible for internet protocol resources, including the registration of commonly
used port numbers for well-known internet services.
Well Known Ports: 0 through 1023.
Registered Ports: 1024 through 49151.
Dynamic/Private : 49152 through 65535.
TCP ports use the Transmission Control Protocol, the most commonly used protocol
on the Internet and any TCP/IP network. TCP enables two hosts
to establish a connection and exchange streams of data. TCP guarantees delivery of data
and that packets will be delivered in the same order in which they were sent.
Guaranteed communication/delivery is the key difference between TCP and UDP.
UDP ports use the Datagram Protocol. Like TCP, UDP is used in combination with IP (the Internet Protocol)
and facilitates the transmission of datagrams from one computer to applications on another computer,
but unlike TCP, UDP is connectionless and does not guarantee reliable communication; it's up to the application that received
the message to process any errors and verify correct delivery. UDP is often used with time-sensitive
applications, such as audio/video streaming and realtime gaming, where dropping some packets is preferable to waiting for delayed data.
When troubleshooting unknown open ports, it is useful to find exactly what services/processes are listening to them.
This can be accomplished in both Windows command prompt and Linux variants using the "netstat -aon" command.
We also recommend runnig multiple anti-virus/anti-malware scans to rule out the possibility of active malicious software.
For more detailed and personalized help please use our forums.
|
Please use the "Add Comment" button below to provide additional information or comments about port 9600.
|
|
|
|
