|
Port 5060 Details
known port assignments and vulnerabilities
threat/application/port search:
| Port(s) |
Protocol |
Service |
Details |
Source |
| 5060 |
tcp,udp |
sip |
Session Initiation Protocol (SIP) (official) - SIP VoIP phones and providers use this port. Asterisk server, X-ten Lite/Pro, Ooma, Vonage (ports 5060,5061,10000-20000), Apple iChat, iTalkBB, Motorola Ojo, OpenWengo, TalkSwitch, IConnectHere, Lingo VoIP (ports 5060-5065), Majicjack (ports 5060, 5070)
Microsoft Lync server uses these ports:
444, 445, 448, 881, 5041, 5060 - 5087, 8404 TCP
80, 135, 443, 4443, 8060, 8061, 8080 TCP - standard ports and HTTP(s) traffic
1434 UDP - SQL
49152-57500 TCP/UDP - media ports
Siemens Openstage and Gigaset phones use the following ports:
389/tcp LDAP
636/tcp LDAPS
5010/tcp - RTP
5060/tcp - SIP gateway, backup proxy
8085/tcp - DLS
18443/TCP and 18444/TCP - provisioning over TLS (HTTPS)
Memory leak in the NAT implementation in Cisco IOS 12.1 through 12.4 and 15.0 through 15.1, and IOS XE 3.1.xSG, allows remote attackers to cause a denial of service (memory consumption or device reload) by sending crafted SIP packets to UDP port 5060, aka Bug ID CSCtj04672.
References: [CVE-2011-3280]
The provider-edge MPLS NAT implementation in Cisco IOS 12.1 through 12.4 and 15.0 through 15.1, and IOS XE 3.1.xSG, allows remote attackers to cause a denial of service (device reload) via a malformed SIP packet to UDP port 5060, aka Bug ID CSCti98219.
References: [CVE-2011-3279]
Unspecified vulnerability in the NAT implementation in Cisco IOS 12.1 through 12.4 and 15.0 through 15.1, and IOS XE 3.1.xSG, allows remote attackers to cause a denial of service (device reload) by sending crafted SIP packets to UDP port 5060, aka Bug ID CSCti48483.
References: [CVE-2011-3278]
Unspecified vulnerability in the NAT implementation in Cisco IOS 12.1 through 12.4 and 15.0 through 15.1, and IOS XE 3.1.xSG, allows remote attackers to cause a denial of service (device reload or hang) by sending crafted SIP packets to TCP port 5060, aka Bug ID CSCso02147.
References: [CVE-2011-3276], [BID-49822]
Unspecified vulnerability in Cisco TelePresence C Series Endpoints, E/EX Personal Video units, and MXP Series Codecs, when using software versions before TC 4.0.0 or F9.1, allows remote attackers to cause a denial of service (crash) via a crafted SIP packet to port 5060 or 5061, aka Bug ID CSCtq46500.
References: [CVE-2011-2577] [BID-49392]
Siemens C450 IP and C475 IP VoIP devices allow remote attackers to cause a denial of service (disconnected calls and device reboot) via a crafted SIP packet to UDP port 5060.
References: [CVE-2008-7065] [BID-32451] [SECUNIA-32827] [OSVDB-50274]
The Grandstream HT-488 0.1 allows remote attackers to cause a denial of service (device crash) via a flood of fragmented packets to port 5060.
References: [CVE-2007-5789], [BID-26349]
Memory leak in Cisco Unified Communications Manager IM and Presence Service before 8.6(5)SU1 and 9.x before 9.1(2), and Cisco Unified Presence, allows remote attackers to cause a denial of service (memory and CPU consumption) by making many TCP connections to port (1) 5060 or (2) 5061, aka Bug ID CSCud84959.
References: [CVE-2013-3453]
Cisco Unified Communications Manager (Unified CM) 8.5(x) and 8.6(x) before 8.6(2a)su3 and 9.x before 9.1(1) does not properly restrict the rate of SIP packets, which allows remote attackers to cause a denial of service (memory and CPU consumption, and service disruption) via a flood of UDP packets to port 5060, aka Bug ID CSCub35869.
References: [CVE-2013-3461]
Cisco TelePresence Video Communication Server is vulnerable to a denial of service, caused by the improper handling of messages by the Session Initiation Protocol (SIP) module. By sending a specially-crafted Session Description Protocol (SDP) message to UDP and TCP port 5060, a remote attacker could exploit this vulnerability to cause the device to reload.
References: [CVE-2014-0662], [BID-65076], [XFDB-90621]
innovaphone is vulnerable to a denial of service, caused by improper bounds checking by protocol SIP/UDP. By sending a specially-crafted SIP request to the open 5060/UDP port, an remote attacker could exploit this vulnerability to cause the VoIP phone to crash and restart.
References: [XFDB-111764]
A vulnerability in the Network Address Translation (NAT) Session Initiation Protocol (SIP) Application Layer Gateway (ALG) of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to improper processing of SIP packets in transit while NAT is performed on an affected device. An unauthenticated, remote attacker could exploit this vulnerability by sending crafted SIP packets via UDP port 5060 through an affected device that is performing NAT for SIP packets. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition.
References: [CVE-2018-0476], [BID-105419]
Polycom VVX 500/601 devices could allow a remote attacker to obtain sensitive information, caused by a flaw in the SIP service. By sending a specially-crafted request to TCP port 5060, a remote attacker could exploit this vulnerability to obtain phone configuration information.
References: [CVE-2018-18566], [XFDB-151919], [BID-105746] |
SG
|
| 5060 |
tcp,udp |
|
Session Initiation Protocol (SIP) (official) |
Wikipedia
|
| 5060,9000-9015 |
udp |
applications |
3CX |
Portforward
|
| 5060,5090 |
tcp |
applications |
3CX |
Portforward
|
| 5060, 5190, 5297, 5298, 5353, 5678, 16384-16403 |
udp |
applications |
iChat |
Portforward
|
| 5060-5065, 5723, 16384-16400 |
tcp,udp |
applications |
IConnectHere |
Portforward
|
| 5060,6802,16384-16482 |
udp |
applications |
iTalkBB |
Portforward
|
| 1024-1030,5060-5065 |
udp |
applications |
Lingo VoIP (can also use ports 10000-20000 udp) |
Portforward
|
| 5060,5070 |
udp |
applications |
Magicjack |
Portforward
|
| 5060-5065 |
tcp |
applications |
Nomado (can also use ports 10000-20000 udp) |
Portforward
|
| 5010-5017,5060 |
udp |
applications |
Ojo |
Portforward
|
| 5060,10600,10602 |
tcp,udp |
applications |
OpenWengo |
Portforward
|
| 3230-3237,5060 |
udp |
applications |
Polycom ViaVideo H.323 |
Portforward
|
| 1720,5060 |
tcp |
applications |
Polycom ViaVideo H.323 |
Portforward
|
| 69, 5060, 6000-6006, 6010-6016, 6020-6026, 6030-6036 |
udp |
applications |
TalkSwitch |
Portforward
|
| 69,5060,16384-16392 |
udp |
applications |
Verizon VoiceWing |
Portforward
|
| 69,5060-5061,10000-20000 |
udp |
applications |
Viatalk |
Portforward
|
| 5060-5061 |
udp |
applications |
Voip.com (also uses ports 10000-20000/udp) |
Portforward
|
| 5060,10600-10601 |
udp |
applications |
Wengo |
Portforward
|
| 5060,8000-8005 |
tcp |
applications |
X-Lite |
Portforward
|
| 5060 |
tcp,udp |
sip |
Session Initiation Protocol (SIP) |
Nmap
|
| 5060 |
tcp,udp |
sip |
SIP [RFC3263] , modified: 2014-04-09 |
IANA
|
| 5060 |
sctp |
sip |
SIP [RFC4168] |
IANA
|
|
23 records found
Related ports: 444 1194 1720 4569 5010 5061 5070 5723 6802 10600 10602 18443 18444
|