Shortcuts
|
Port 17185 Details
known port assignments and vulnerabilities
threat/application/port search:
| Port(s) |
Protocol |
Service |
Details |
Source |
| 17185 |
udp |
applications |
Cisco IP Phone (VoIP) 7920 1.0(8) listens to UDP port 17185 to support a VxWorks debugger, which allows remote attackers to obtain sensitive information and cause a denial of service.
References: [CVE-2005-3804], [SECUNIA-17604], [BID-15456]
Act P202S VoIP WiFi phone undocumented open port, multiple vulnerabilities.
References: [CVE-2006-0374], [CVE-2006-0375], [BID-16288]
The WDB target agent debug service in Wind River VxWorks 6.x, 5.x, and earlier, as used on the Rockwell Automation 1756-ENBT series A with firmware 3.2.6 and 3.6.1 and other products, allows remote attackers to read or modify arbitrary memory locations, perform function calls, or manage tasks via requests to UDP port 17185, a related issue to CVE-2005-3804.
References: [CVE-2010-2965]
The debugging feature on the Siemens CP 1604 and CP 1616 interface cards with firmware before 2.5.2 allows remote attackers to execute arbitrary code via a crafted packet to UDP port 17185.
References: [CVE-2013-0659]
This document describes a security vulnerability in Blade Maintenance Entity, Integrated Maintenance Entity and Maintenance Entity products. All J/H-series NonStop systems have a security vulnerability associated with an open UDP port 17185 on the Maintenance LAN which could result in information disclosure, denial-of-service attacks or local memory corruption against the affected system and a complete control of the system may also be possible. This vulnerability exists only if one gains access to the Maintenance LAN to which Blade Maintenance Entity, Integrated Maintenance Entity or Maintenance Entity product is connected. **Workaround:** Block the UDP port 17185(In the Maintenance LAN Network Switch/Firewall). Fix: Install following SPRs, which are already available: * T1805A01^AAI (Integrated Maintenance Entity) * T4805A01^AAZ (Blade Maintenance Entity). These SPRs are also usable with the following RVUs: * J06.19.00 ? J06.23.01. No fix planned for the following RVUs: J06.04.00 ? J06.18.01. No fix planned for H-Series NonStop systems. No fix planned for the product T2805 (Maintenance Entity).
References: [CVE-2020-7131], [XFDB-180715]
Schneider Electric SCADAPack could allow a remote attacker to execute arbitrary code on the system, caused by the enablement of the VxWorks debug agent. By sending specially-crafted requests to UDP Port 17185, an attacker could exploit this vulnerability to gain control of the device or cause a denial of service.
References: [XFDB-91050] |
SG
|
| 17185 |
udp |
wdbrpc |
vxWorks WDB remote debugging ONCRPC |
Nmap
|
| 17185 |
tcp,udp |
soundsvirtual |
Sounds Virtual |
IANA
|
|
3 records found
|
jump to:
|
Related ports: 7 512
« back to SG Ports
External Resources
SANS ISC: port 17185
Notes:
Port numbers in computer networking represent communication endpoints. Ports are unsigned 16-bit integers (0-65535) that identify
a specific process, or network service. IANA is responsible for internet protocol resources, including the registration of commonly
used port numbers for well-known internet services.
Well Known Ports: 0 through 1023.
Registered Ports: 1024 through 49151.
Dynamic/Private : 49152 through 65535.
TCP ports use the Transmission Control Protocol, the most commonly used protocol
on the Internet and any TCP/IP network. TCP enables two hosts
to establish a connection and exchange streams of data. TCP guarantees delivery of data
and that packets will be delivered in the same order in which they were sent.
Guaranteed communication/delivery is the key difference between TCP and UDP.
UDP ports use the Datagram Protocol. Like TCP, UDP is used in combination with IP (the Internet Protocol)
and facilitates the transmission of datagrams from one computer to applications on another computer,
but unlike TCP, UDP is connectionless and does not guarantee reliable communication; it's up to the application that received
the message to process any errors and verify correct delivery. UDP is often used with time-sensitive
applications, such as audio/video streaming and realtime gaming, where dropping some packets is preferable to waiting for delayed data.
When troubleshooting unknown open ports, it is useful to find exactly what services/processes are listening to them.
This can be accomplished in both Windows command prompt and Linux variants using the "netstat -aon" command.
We also recommend runnig multiple anti-virus/anti-malware scans to rule out the possibility of active malicious software.
For more detailed and personalized help please use our forums.
|
Please use the "Add Comment" button below to provide additional information or comments about port 17185.
|
|
|
|
|
