The AP also has what ZyXEL calls "load balancing" which actually lets you specify a hard limit on the number of wireless clients, or bounce new wireless connections when certain bandwidth limit is reached to avoid congestion.
| NWA-3163 Features | |
| General | |
| Availability: | discontinued |
| Street price: |
$176 |
| Warranty: | 2 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Serial port: |
|
| Router | |
| DHCP client: |
|
| QoS: |
|
| ToS / DiffServ: |
|
| Routing Protocols: |
Spanning Tree Protocol (STP) VLAN tagging (802.1q) |
| Wireless | |
| Maximum Wireless Speed: | 54 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) RADIUS authentication Wireless MAC Address filtering |
| WiFi modes: | Access point |
| external antenna(s): | 2 |
| ext antenna(s) removable ?: |
|
| Antenna gain: | 3 dBi |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| VPN | |
| RADIUS support: |
|
| Device Management | |
| Default IP address: | 192.168.1.2 |
| Default admin username: | n/a |
| Default admin password: | 1234 |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Telnet / CLI TFTP (RFC 1350) |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.1, SNMP v.2 |
| NTP client: |
|
| Power over Ethernet (PoE): |
|
| Links | |
| Product page: | http://www.zyxel.com/index.shtml |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|