This adapter supports a variety of VoIP features, such as call waiting, caller ID, call transfer and distinctive ring. It can be configured remotely using a TFTP or HTTP download from the service provider and updates to the firmware can be automatically delivered. Up to five and often more attached phones can be rung simultaneously on each FXS port using the built-in ring generator.
| 5801 Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| RJ-11 FXS VoIP phone ports: | 1 |
| RJ-11 FXO VoIP PSTN wall jack port: | 1 |
| Auto-failover connection: |
 |
| Router | |
| DHCP client: |
|
| QoS: |
|
| ToS / DiffServ: |
|
| MTU configurable (WAN): |
|
| MTU limit (WAN): | 1500 |
| VoIP | |
| VoIP Protocols: |
SIP v2 (RFC 3261) SDP (RFC 2327) RTP / RTCP (RFCs 1889/1890) AVT / X-NSE (RFC 2833) STUN (RFC 3489) |
| VoIP Audio Codecs: |
G.711 (PCM) G.729 (a/b) iLBC (Internet Low Bitrate Codec) |
| VoIP Voice Features: |
Echo Cancellation (G.165/G.168) 3-way conferencing Caller ID Call waiting Call transfer Call forward Call Blocking Speed Dialing Distinctive Ring Do Not Disturb (DND) |
| Device Management | |
| Default IP address: | www.zoom.com/atamanager |
| Default admin username: | n/a |
| Default admin password: | n/a |
| Administration: |
Web-based (LAN) Telnet / CLI Windows application Remote centralized management TFTP (RFC 1350) |
| Firmware upgradeable: |
|
| Event log: |
|
| Misc hardware info | |
| NTP client: |
|
| Links | |
| Product page: | http://www.zoomtel.com/products/voip_pro... |
| Datasheet: | http://www.zoomtel.com/graphics/datashee... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
User Reviews/Comments:
rate:
avg:
by
telecomuser - 2020-12-26 13:50
Good bit of kit. But have been unable to get VoIP to PSTN and PSTN to VoIP bridging working. May be a configuration issue but either on PSTN or VoIP calls are not answered.
If anybody has managed to get the bridging working how do you do it? If just want to have a analogue phone connected to a PBX then it’s definitely a good option which if was all it was supposed to do I would give it excellent rating but it should do more than this! |
|
|