This router provides VPN pass-through for IPSec and PPTP, allowing you to establish up to 30 simultaneous VPN tunnels. It also supports VPN auto-failover. In the event of a VPN tunnel failing, the XC-DPG503 can re-establish the tunnel with the second WAN port connection. A built-in SPI firewall protects the network from hackers and Denial of Service (DoS) attacks.
The router can be easily configured via Web-based configuration utility or via SNMP v.1.
| XC-DPG503 Features | |
| General | |
| Availability: | currently available |
| Warranty: | 3 year(s) |
| LAN / WAN Connectivity | |
| WAN throughput: |
44 Mbps |
| WAN ports: |
2 |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
|
| Auto-failover connection: |
|
| Load Balancing: |
|
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port forwarding of ranges: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| ToS / DiffServ: |
|
| UPnP: |
|
| Transparent Bridging (IEEE 802.1d): |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) |
| DSL | |
| PPPoE client: |
|
| VPN | |
| VPN Authentication: | MD5 (128-bit), SHA1 (160-bit), SHA2, IKE (IPSec) Key Management |
| VPN Encryption: | DES (56-bit), 3DES (168-bit), AES (128-bit) |
| IPSec | |
| IPSec server: |
 |
| IPSec client: |
|
| IPSec passthrough: |
|
| IPSec simultaneous tunnels: | 30 |
| IPSec throughput: | 10 Mbps |
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: | Domain/URL blocking, packet filtering |
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Default admin username: | admin |
| Default admin password: | (blank) |
| Administration: |
Web-based (LAN) Remote configuration (WAN) |
| Firmware upgradeable: |
|
| Misc hardware info | |
| Chipset: | RISC 166MHz processor |
| RAM: | 16 Mb |
| Flash Memory: | 1 Mb |
| SNMP support: | SNMP v.1 |
| Notes: | supports load balancing over both WAN ports imultaneously by packets, bytes rx+tx, sessions, and IP address. |
| Links | |
| Product page: | http://www.xincom.com/products/dpg/503/ |
| Datasheet: | http://speedguide.net/images/hardware/xi... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|