Shortcuts
|
 |
Winstars WS-WN518W2
|
| details: | N300 Wireless AP/Repeater |
| hardware type: | Wireless Access Point |
| date added: | 2016-02-13 |
The WS-WN518W2 WiFi Repeater is used to broaden range of a wireless network.
It works by receiving the wireless signal from a router and then amplify and rebroadcast it around locally. With a wifi repeater computers and printers that are located out of the original range of access point can access the extended wi-fi network.
The WS-WN518W2 has one 10/100Mbps LAN port. It is WDS compatible and features a WPS button.
| WS-WN518W2 Features |
| General
|
| Availability: |
currently available
|
| LAN / WAN Connectivity
|
| WAN ports: |
0
|
| LAN ports: |
1 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| DHCP client: |
|
| Wireless
|
| Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
|
| WiFi modes: |
Access point
|
| internal antenna(s): |
2 |
| Antenna gain: |
2 dBi |
| Transmit Power: |
+14 dBm |
| Receiver Sensitivity: |
-70 dBm |
| WDS compatible: |
|
| WPS (Wi-Fi Protected Setup): |
|
| Device Management
|
| Administration: |
Web-based (LAN)
|
| Firmware upgradeable: |
|
| Misc hardware info
|
| Chipset: |
RTL8196E |
| RAM: |
128 Mb |
| Flash Memory: |
16 Mb |
| Links
|
| Product page: |
http://www.win-star.com/eshop/goods.php?... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
