This router supports Access Point, Wireless Router, Client, WISP Router and Repeater modes. It features one 10/100Mbps WAN/LAN port. A hardware-based mode switch is provided to swap between Router and AP functions.
TL-WR706N comes with preconfigured wireless security settings, including WEP and WPA/WPA2 wireless encryption.
| TL-WR706N Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| UPnP: |
|
| Wireless | |
| Maximum Wireless Speed: | 150 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) |
| WiFi modes: |
Access point Wireless client Wireless bridge (PtP) Repeater mode WISP mode |
| Receiver Sensitivity: | -76 dBm |
| WDS compatible: |
|
| WMM (QoS): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| L2TP | |
| L2TP passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: | Domain/URL blocking, IP Address filtering, MAC Address filtering |
| Device Management | |
| Default IP address: | 192.168.0.254 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Remote configuration (WAN) |
| Firmware upgradeable: |
|
| Usage Statistics: |
|
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|