The TL-WA601G features one 10/100Base-T LAN port. It is WDS compatible and it can act as a DHCP server.
This AP can operate in Wireless Client, Wireless Bridge and Repeater modes.
| TL-WA601G Features | |
| General | |
| Availability: | discontinued |
| Street price: |
$26 |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| DHCP server: |
|
| Wireless | |
| Maximum Wireless Speed: | 108 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11g+ (108 Mbps+) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Wireless client Wireless bridge (PtP) Multipoint bridge (PtMP) Repeater mode |
| external antenna(s): | 1 |
| ext antenna(s) removable ?: |
|
| Antenna connector: | RP-SMA (Reverse SMA) |
| Antenna gain: | 4 dBi |
| Transmit Power: | +20 dBm |
| Receiver Sensitivity: | -68 dBm |
| WDS compatible: |
|
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Links | |
| Product page: | http://www.tp-link.com/en/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
User Reviews/Comments:
rate:
avg:
by
agent86 - 2011-07-30 21:45
Good product, I've had one of these for about 3 years and it's operates fine in a small LAN (haven't used it with more than 5 devices connected). Does all the usual things, eg configure security (WEP, WPA, or WPA2, with AES or TKIP), restrict MAC access, set channel, act as an AP, a repeater or a bridge, shows who's connected, DHCP server, etc. Only gripes are that it can only be configured by the in-built web interface and not by SSH or telnet, and it has a useless syslog server (only logs the time it was switched on but not useful things like who's connected and when, nor can the syslog be sent to a monitoring server). This model now appears to be discontinued. The hyperlink to the TP-Link product page gives a 404 Page Not Found error, and it can't even be found by searching for the model number on the TP-Link website. Although you can still download the manual and datasheet.
|
|
|