The device provides 3 operation modes: AP client router, AP router and AP. In AP client router mode, it works as a WISP CPE and can access the Internet wirelessly via your WISP. In AP router mode, it can access the Internet via an ADSL/Cable Modem, while sharing data wirelessly. In AP mode it can work in various modes, such as Access Point/Client/WDS Bridge/Repeater.
The TL-WA5210G provides multiple protection measures. It can be set to turn off wireless network name (SSID) broadcast so that only stations that have the SSID can be connected. The AP provides wireless LAN 64/128/152-bit WEP encryption security, and WPA/WPA2 and WPA-PSK/WPA2-PSK authentication, as well as TKIP/AES encryption security. It also supports VPN pass-through for sensitive data secure transmission.
The TL-WA5210G supports 4000V lightning protection.
| TL-WA5210G Features | |
| General | |
| Availability: | end of life |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| UPnP: |
|
| MAC Address clone: |
|
| Wireless | |
| Maximum Wireless Speed: | 54 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Wireless client Wireless bridge (PtP) Repeater mode WISP mode |
| internal antenna(s): | 1 |
| external antenna(s): | 1 |
| ext antenna(s) removable ?: |
|
| Antenna connector: | RP-SMA (Reverse SMA) |
| Antenna gain: | 12 dBi |
| Receiver Sensitivity: | -76 dBm |
| WDS compatible: |
|
| WMM (QoS): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| DoS / DDoS protection: |
|
| Filtering: | Domain/URL blocking, IP Address filtering, MAC Address filtering |
| Device Management | |
| Default IP address: | 192.168.1.254 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.2 |
| Power over Ethernet (PoE): |
|
| Links | |
| Product page: | http://www.tp-link.com/en/products/detai... |
| Datasheet: | http://www.tp-link.com/resources/documen... |
| Manual: | http://www.tp-link.com/resources/softwar... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
User Reviews/Comments:
rate:
avg:
by
naveeddil - 2012-02-25 15:52
Dear All,
Can i use this "TL-WA5210G" as a hotspot? Please HELP |
|
|