TD-W8950ND is a high speed solution that complies with wireless 802.11b/g, and is compatible with 802.11n standard. Based on Lite N technology and with CCA automatically avoiding channel conflicts, TD-W8950ND provides speeds of up to 150Mbps. It features a QSS/WPS button for easy wireless security configuration.
This router provides VPN pass-through for IPSec and PPTP, allowing you to establish up to 10 simultaneous IPSec tunnels.
The device comes with a CD with an Easy Setup Assistant that helps you step by step to complete your Internet connection, wireless network settings and security configurations.
| TD-W8950ND Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN throughput: |
24 Mbps |
| WAN throughput upstream: |
1 Mbps |
| WAN ports: |
1 |
| WAN port(s) type: | DSL/ISDN/POTS connector (RJ-11) |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| ToS / DiffServ: |
|
| UPnP: |
|
| MAC Address clone: |
|
| Transparent Bridging (IEEE 802.1d): |
|
| Routing Protocols: | IGMP Multicast (RFC 1112) |
| DSL | |
| DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) RE-ADSL2 (G.992.3 Annex L) ADSL2+ (G.992.5) |
| PPPoE client: |
|
| PPPoA client: |
|
| Wireless | |
| Maximum Wireless Speed: | 150 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering |
| WiFi modes: |
Access point Wireless bridge (PtP) |
| external antenna(s): | 1 |
| Antenna gain: | 3 dBi |
| Transmit Power: | +19 dBm |
| Receiver Sensitivity: | -68 dBm |
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| IPSec simultaneous tunnels: | 10 |
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| SPI firewall: |
|
| Filtering: | Domain/URL blocking, IP Address filtering, MAC Address filtering |
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Quick Setup Wizard Windows application |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Usage Statistics: |
|
| Diagnostic functions: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.2 |
| NTP client: |
|
| Links | |
| Product page: | http://www.tp-link.com/en/products/detai... |
| Datasheet: | http://www.tp-link.com/support/todownloa... |
| Manual: | http://www.tp-link.com/resources/softwar... |
| Quick Install Guide: | http://www.tp-link.com/Resources/documen... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|