WiFi 7 offers accelerated throughput, lower latency, stronger anti-jamming, and higher efficiency.
Multi-Link Operation (MLO) enables Archer BE450 to transmit data with Wi-Fi 7 clients across multiple bands simultaneously to increase throughput, reduce latency, and improve reliability for various networking behaviors.
Experience lightning-speed connectivity with a 10 Gbps port and a 2.5 Gbps port, maximizing Gigabit+ speeds delivered by your internet provider.
Archer BE450 is EasyMesh-compatible. If you have any dead zones at home, just add another EasyMesh router/range extender to further form your whole home multi-gigabit mesh WiFi. No more searching for a stable connection.
Allow devices in your home network to access remote VPN servers without needing to install VPN software on every device. Archer BE450 can run both the VPN and ordinary internet connections at the same time, delivering security and flexibility.
Install the Tether app and simply follow the on-screen directions. In just three easy steps your entire home can be blanketed in strong and reliable WiFi.
| Archer BE450 Features | |
| General | |
| Availability: | currently available |
| Street price: |
$277 |
| LAN / WAN Connectivity | |
| WAN ports: |
2 the WAN ports can act as LAN ports as well |
| WAN port(s) type: | Gigabit Ethernet (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 3 |
| LAN ports type: | Gigabit Ethernet (RJ-45) |
| LAN ports auto cross-over: |
|
| USB port(s): |
1 for storage devices |
| USB port type: | USB 3.0 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| Routing Protocols: |
BGP (RFC 1771) VLAN tagging (802.1q) IGMP Multicast (RFC 1112) |
| Wireless | |
| Maximum Wireless Speed: | 7200 Mbps (802.11ad + 802.11ac) |
| WiFi standards supported: | 802.11be (Wi-Fi 7) |
| Wifi security/authentication: |
WPA (TKIP) WPA2 (AES) WPA3 802.1X (EAP-MD5/TLS/TTLS/PEAP) |
| WiFi modes: | Access point |
| internal antenna(s): | 3 |
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| MU-MIMO: |
|
| Beamforming: |
|
| Dual Band (2.4GHz/5GHz): |
|
| Simultaneous Dual Band (2.4GHz/5GHz): |
|
| VPN | |
| L2TP | |
| L2TP server: |
|
| L2TP client: |
|
| PPTP | |
| PPTP server: |
|
| PPTP client: |
|
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: | IP Address filtering, MAC Address filtering |
| Device Management | |
| Default IP address: | http://192.168.0.1 |
| Alternate Admin URL: | http://tplinkwifi.net |
| Administration: |
Web-based (LAN) Remote configuration (WAN) |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Misc hardware info | |
| IPv6 support: |
|
| Links | |
| Product page: | https://www.tp-link.com/en/home-networki... |
| Datasheet: | https://static.tp-link.com/upload/produc... |
| Manual: | https://static.tp-link.com/upload/manual... |
| Quick Install Guide: | https://static.tp-link.com/upload/manual... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|