This router supports VPN pass-through for IPSec and PPTP. It features a built-in SPI firewall to protect the network against hackers and Denial of Service (DoS) attacks.
The router can be easily configured via Web-based configuration utility or SNMP v.1.
| SpeedTouch 510 Features | |
| General | |
| Availability: | discontinued |
| Hardware revision: | v5 |
| Warranty: | 1 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | DSL/ISDN/POTS connector (RJ-11) |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| USB port(s): |
0 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port forwarding of ranges: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| DNS proxy: |
|
| UPnP: |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) |
| DSL | |
| DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) ADSL2+ (G.992.5) |
| PPPoE client: |
|
| PPPoA client: |
|
| VPN | |
| VPN Authentication: | IKE (IPSec) Key Management |
| IPSec | |
| IPSec passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Security log: |
|
| Device Management | |
| Default IP address: | 10.0.0.138 |
| Administration: |
Web-based (LAN) Telnet / CLI Windows application |
| Firmware upgradeable: |
|
| Event log: |
|
| Misc hardware info | |
| Chipset: | Sachem SEA |
| RAM: | 4 Mb |
| Flash Memory: | 2 Mb |
| SNMP support: | SNMP v.1 |
| NTP client: |
|
| Links | |
| Product page: | http://www.technicolor.com/en/solutions-... |
| Datasheet: | http://www.speedguide.net/images/hardwar... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
User Reviews/Comments:
rate:
avg:
by
tcoupload - 2017-05-22 09:08
The last firmware made for it?
|
|
|