The integrated access point supports 802.11b/g standards with wireless transmission rates of up to 54Mbps. It supports WEP and WPA/WPA2 wireless encryption.
A built-in SPI firewall protects the network against intruders and Denial of Service (DoS) attacks.
| SMC8014WG-SI Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| WAN throughput: |
38 Mbps |
| WAN throughput upstream: |
30 Mbps |
| WAN ports: |
1 |
| WAN port(s) type: | Coax F-connector |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| Transparent Bridging (IEEE 802.1d): |
|
| Cable Modem | |
| DOCSIS compliance: |
DOCSIS 1.1 DOCSIS 2.0 |
| Wireless | |
| Maximum Wireless Speed: | 54 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: | Access point |
| external antenna(s): | 1 |
| ext antenna(s) removable ?: |
 |
| VPN | |
| VPN Encryption: | RC4 (128-bit) |
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Intrusion Detection System (IDS): |
|
| Security log: |
|
| Filtering: | Domain/URL blocking, MAC Address filtering, date/time scheduling |
| Device Management | |
| Default IP address: | 192.168.0.1 |
| Default admin username: | cusadmin |
| Default admin password: | password |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Telnet / CLI |
| Firmware upgradeable: |
|
| Event log: |
|
| Usage Statistics: |
|
| Links | |
| Product page: | http://na.smc.com/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|