Through the integrated 5-port switch you can also connect multiple wired devices to the range extender. The switch has 5 Fast Ethernet ports that support wired transfer speed up to 100 Mbps.
This product comes with the extensive 10-year Sitecom warranty.
| WLX-2001 Features | |
| General | |
| Availability: | currently available |
| Warranty: | 10 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
|
| Router | |
| DHCP server: |
|
| DHCP client: |
|
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) |
| WiFi modes: | Repeater mode |
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| Device Management | |
| Default IP address: | 192.168.0.1 |
| Alternate Admin URL: | http://wlx2001.setup |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Links | |
| Product page: | http://www.sitecom.com/wi-fi-range-exten... |
| Manual: | http://www.sitecom.com/file/wlx-2001-ful... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
User Reviews/Comments:
rate:
avg:
by
Gordon Low - 2013-03-26 09:31
Setup instructions require access to a sitecom website. The site address cannot be found by browsers so it is not possible to setup the device. Support requests by email are unanswered.
I have the same problem
Have the same problem, but did get an answer on my email:
Have you disabled DHCP server in the settings of WLX-2001 after it was configured? If this was not done please disable DHCP by entering the settings of WLX-2001 and going to Toolbox - IP Management.
Where can i find the answer on this problem?
It requires an ict pro to be configurated.
Same problem. How can we do this?
With most routers, you should be able to find their IP address by dropping to command prompt (on Windows PCs), and typing: ipconfig [enter]
Look for the "Default Gateway" line, that should be the IP of the router you are connected to. Try that IP address in your web browser to get to its admin interface.
I have a WLX2001 sitecom range extender. I did a factory reset and now the admin admin is not accepted and there is no WPA sticker on the extender. Any advice please?
|
|
|