It supports wireless speeds of up to 300Mbps. WMM (QoS) prioritizes the traffic over the network. A WPS button allows for easy connection to other WPS enabled devices.
The device is used by Bell Canada and also known as "Bell Connection Hub".
| F@st 2864 Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| WAN ports: |
1 one 10/100 Base-T WAN port |
| WAN port(s) type: | DSL/ISDN/POTS connector (RJ-11) |
| LAN ports: | 4 |
| LAN ports type: | Gigabit Ethernet (RJ-45) |
| LAN ports auto cross-over: |
 |
| HomePNA: | HPNA 1.0 |
| USB port(s): |
2 for storage devices |
| USB port type: | USB 2.0 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| DSL | |
| DSL compliance: | VDSL (G.993.1) |
| PPPoE client: |
|
| PPPoA client: |
|
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: | Access point |
| WMM (QoS): |
|
| WMM-PS (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| Device Management | |
| Default IP address: | 192.168.2.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Event log: |
|
| Usage Statistics: |
|
| Links | |
| Product page: | https://www.sagemcom.com/en |
| Quick Install Guide: | http://www.speedguide.net/images/hardwar... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|