RNX-TRT150 can also be used as a wireless access point (AP). This mode can be simply set as bridge mode, connecting the network cable, and then share internet to devices wirelessly.
RNX-TRT150 is a standard USB charger as well; when the device is plugged into a wall outlet which provides power output with 5V DC. It can charge your devices with USB interface, and it is Plug and Play.
| RNX-TRT150 Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| UPnP: |
|
| MAC Address clone: |
|
| Wireless | |
| Maximum Wireless Speed: | 150 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Wireless bridge (PtP) |
| Transmit Power: | +15 dBm |
| Default SSID: | RNX-TRT150 |
| Device Management | |
| Default IP address: | 192.168.2.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Misc hardware info | |
| USB power cable: |
|
| Links | |
| Product page: | https://www.rosewill.com/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|