The device features advanced algorithms for automatic selection of modulation schemes to maximize the data rate and improve spectral efficiency. Software features include WDS setting, Bridge VLAN setting, filtering, SNMP, web management, advanced QoS, DHCP, firewall, PPPoE, high grade encryption, port forwarding, and Bandwidth control.
| RP-WAC5405 Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | Gigabit Ethernet (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| DHCP server: |
|
| DHCP client: |
|
| QoS: |
|
| Routing Protocols: | VLAN tagging (802.1q) |
| DSL | |
| PPPoE client: |
|
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) |
| WiFi modes: |
Access point Wireless client Wireless bridge (PtP) Multipoint bridge (PtMP) Repeater mode |
| internal antenna(s): | 2 |
| Transmit Power: | +20 dBm |
| Receiver Sensitivity: | -88 dBm |
| WDS compatible: |
|
| WMM (QoS): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| L2TP | |
| L2TP passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Device Management | |
| Default IP address: | 192.168.0.254 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Misc hardware info | |
| RAM: | 16 Mb |
| Flash Memory: | 2 Mb |
| SNMP support: | SNMP v.1, SNMP v.2 |
| Power over Ethernet (PoE): |
|
| Links | |
| Product page: | https://www.repotec.com/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|