To protect your wireless connectivity, RP-WA8610P can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA2/WPA/802.1x for powerful security authentication. The MAC addresses filter lets you select exactly which stations should have access to your network.
This device can act as a DHCP client/server.
| RP-WA8610P Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| DHCP server: |
|
| DHCP client: |
|
| MAC Address clone: |
|
| Wireless | |
| Maximum Wireless Speed: | 54 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Wireless client Wireless bridge (PtP) Multipoint bridge (PtMP) |
| external antenna(s): | 1 |
| ext antenna(s) removable ?: |
|
| Antenna connector: | RP-TNC (Reverse TNC) |
| Transmit Power: | +26 dBm |
| Receiver Sensitivity: | -74 dBm |
| WDS compatible: |
|
| Dual Band (2.4GHz/5GHz): |
|
| Device Management | |
| Default IP address: | 192.168.1.2 |
| Default admin username: | (blank) |
| Default admin password: | (blank) |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Telnet / CLI |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info | |
| Power over Ethernet (PoE): |
|
| Links | |
| Product page: | https://www.repotec.com/index.php/produc... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|