The integrated AP complies with IEEE 802.11n standard and it is backwards compatible with IEEE 802.11b/g standards. It uses WMM to prioritize the traffic over the network. A WPS button allows for easy security configuration.
This router supports several operating modes: AP, Universal Repeater, Wireless Client.
| WNR1010 Features | |
| General | |
| Availability: | discontinued |
| Router | |
| NAT routing: |
 |
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| MAC Address clone: |
|
| Routing Protocols: |
Spanning Tree Protocol (STP) VLAN tagging (802.1q) |
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) SSID Broadcast disable |
| WiFi modes: |
Access point Wireless client Repeater mode |
| external antenna(s): | 2 |
| ext antenna(s) removable ?: |
|
| Transmit Power: | +20 dBm |
| Receiver Sensitivity: | -86 dBm |
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| Firewall | |
| DoS / DDoS protection: |
|
| Filtering: | Domain/URL blocking, IP Address filtering, MAC Address filtering |
| Device Management | |
| Default IP address: | 192.168.123.254 |
| Default admin username: | admin |
| Default admin password: | password |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Links | |
| Product page: | https://prolink2u.com/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|