Client PCs can be connected to either the 10/100Base-T Ethernet LAN port or the USB 1.1 port.
The router supports both Static and Dynamic IP Routing, Network Address Translation and Dynamic Host Configuration Protocol Server. It provides VPN pass-through for IPSec and PPTP.
| H9000 Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| WAN throughput: |
8 Mbps |
| WAN throughput upstream: |
1 Mbps |
| WAN ports: |
1 |
| WAN port(s) type: | DSL/ISDN/POTS connector (RJ-11) |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| USB port(s): |
1 for client PCs |
| USB port type: | USB 1.1 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| Transparent Bridging (IEEE 802.1d): |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) IGMP Multicast (RFC 1112) |
| DSL | |
| DSL compliance: | ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) |
| PPPoE client: |
|
| PPPoA client: |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Device Management | |
| Default IP address: | 10.0.0.2 |
| Default admin username: | admin |
| Default admin password: | password |
| Administration: |
Web-based (LAN) Remote configuration (WAN) TFTP (RFC 1350) |
| Firmware upgradeable: |
|
| Event log: |
|
| Usage Statistics: |
|
| Links | |
| Product page: | https://prolink2u.com/ |
| Datasheet: | http://www.speedguide.net/images/hardwar... |
| Manual: | http://www.speedguide.net/images/hardwar... |
| Quick Install Guide: | http://www.speedguide.net/images/hardwar... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|