The maximum number of client users is up to 250, ensuring more secure and robust connectivity with the adoption of Wi-Fi 6 technology.
The WDAP-C1800AX can be installed in public areas such as hotspots, airports and conferences as OFDMA, a multi-user version of OFDM, enables the concurrent AP to communicate (uplink and downlink) with multiple clients by assigning subsets of subcarriers called resource units (RUs) to the individual clients.
With MU-MIMO and Seamless Roaming technologies, it provides a better Wi-Fi user experience, reducing the likelihood of users turning off Wi-Fi and putting more load on the cellular network. These technologies also can solve Wi-Fi congestion issues in open work spaces and conference rooms. The WDAP-C1800AX can offer coverage of up to 250 client users.
The WDAP-C1800AX supports WPA/WPA2PSK-TKIPAES, and WPA3PSK-TKIPAES wireless encryptions, and also supports the WPA2/WPA3PSK-TKIPAES at the same time, which can effectively prevent eavesdropping by unauthorized users or bandwidth occupied by unauthenticated wireless access. Furthermore, any users are granted or denied access to the wireless LAN network based on the ACL (Access Control List) that the administrator pre-established. For management purposes, the IEEE 802.1Q VLAN supported allows multiple VLAN tags to be mapped to multiple SSIDs to distinguish the wireless access.
The WDAP-C1800AX supports the simplified usage modes of AP, Gateway and Repeater, through which they provide more flexibility for users when wireless network is established.
With the standard IEEE802.3at Power over Ethernet (PoE) design, the WDAP-C1800AX can be easily installed in the areas where power outlets are not available. By supporting the standard IEEE 802.3at PoE PD power scheme, the WDAP-C1800AX can be powered and networked by a single UTP cable, effectively eliminating the needs of dedicated electrical outlets on the ceiling and reducing the cabling cost. Furthermore, the system administrator is able to arrange the PoE schedule of the WDAP-C1800AX by working with the managed PoE switch.
| WDAP-C1800AX Features | |
| General | |
| Availability: | currently available |
| Street price: |
$176 |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 2 |
| LAN ports type: | Gigabit Ethernet (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| DHCP client: |
|
| UPnP: |
|
| Routing Protocols: |
VLAN tagging (802.1q) IGMP Multicast (RFC 1112) |
| Wireless | |
| Maximum Wireless Speed: | 1800 Mbps (Wi-Fi 6) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) 802.11ac (Wi-Fi 5) 802.11ax (Wi-Fi 6) |
| Wifi security/authentication: |
WPA (TKIP) WPA2 (AES) WPA3 802.1X (EAP-MD5/TLS/TTLS/PEAP) SSID Broadcast disable |
| WiFi modes: |
Access point Repeater mode |
| internal antenna(s): | 4 |
| Antenna gain: | 5 dBi |
| Transmit Power: | +20 dBm |
| Receiver Sensitivity: | -77 dBm |
| Multiple SSID: |
|
| WMM (QoS): |
|
| MIMO: |
|
| MU-MIMO: |
|
| Dual Band (2.4GHz/5GHz): |
|
| Simultaneous Dual Band (2.4GHz/5GHz): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| L2TP | |
| L2TP passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| Filtering: | Domain/URL blocking, IP Address filtering, MAC Address filtering |
| Device Management | |
| Default IP address: | 192.168.1.253 |
| Default admin password: | admin |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Misc hardware info | |
| Max clients: |
250 |
| Power over Ethernet (PoE): |
|
| Links | |
| Product page: | https://www.planet.com.tw/en/product/wda... |
| Datasheet: | https://www.planet.com.tw/storage/produc... |
| Manual: | https://www.planet.com.tw/storage/produc... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|