With IEEE 802.11n technology and backwards compatible with 802.11b/g, the VRT-402N supports not only AP mode, but also Bridge (AP disable / Repeater AP Enabled), Universal Repeater and WISP modes.
With full VPN capability that includes DES / 3DES / AES encryption and MD5/SHA-1 authentication, PPTP and L2TP server / client mechanism.
| VRT-402N Features | |
| General | |
| Availability: | currently available |
| Street price: |
$99 |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
|
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| UPnP: |
|
| Routing Protocols: | Spanning Tree Protocol (STP) |
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Wireless bridge (PtP) Repeater mode WISP mode |
| external antenna(s): | 1 |
| ext antenna(s) removable ?: |
|
| Antenna gain: | 2 dBi |
| Transmit Power: | +15 dBm |
| Receiver Sensitivity: | -72 dBm |
| Multiple SSID: |
|
| WDS compatible: |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN | |
| VPN Authentication: | MD5 (128-bit), SHA1 (160-bit), IKE (IPSec) Key Management |
| VPN Encryption: | DES (56-bit), 3DES (168-bit), AES (128-bit) |
| IPSec | |
| IPSec server: |
|
| IPSec client: |
|
| IPSec passthrough: |
|
| IPSec simultaneous tunnels: | 25 |
| PPTP | |
| PPTP server: |
|
| PPTP client: |
|
| PPTP passthrough: |
|
| PPTP simultaneous tunnels: | 10 |
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: | Domain/URL blocking, IP Address filtering, MAC Address filtering, keyword/content filtering |
| Device Management | |
| Default IP address: | 192.168.0.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Event log: |
|
| Misc hardware info | |
| NTP client: |
|
| Links | |
| Product page: | http://www.planet.com.tw/en/product/prod... |
| Datasheet: | http://www.planet.com.tw/en/product/imag... |
| Manual: | http://www.planet.com.tw/en/product/imag... |
| Quick Install Guide: | http://www.planet.com.tw/en/product/imag... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|