5 Gigabit ports - connect more wired devices for faster file transfer and uninterrupted connections. Two (2) ports can be aggregated for faster LAN transfer and two (2) can be aggregated to enable multi-Gig Internet.
160MHz channel support - doubles the speeds offered by 80MHz channels to provide Gigabit speeds for compatible devices. Beamforming+ boosts speed, reliability, and range of WiFi connections.
With 4-stream MU-MIMO, use up to four 1x1 devices to stream content at the same time.
Dynamic QoS - prioritizes Internet traffic by application and device for smoother streaming.
With the Nighthawk app, setup takes just minutes, so you can start enjoying better WiFi sooner. You can also see your connected devices, run an internet speed test, manage your NETGEAR service subscriptions, and more from the palm of your hand.
Use voice commands to control your home WiFi network. Works with Amazon Alexa and the Google Assistant.
| RAX78 Features | |
| General | |
| Availability: | announced |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | Gigabit Ethernet (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 4 |
| LAN ports type: | Gigabit Ethernet (RJ-45) |
| LAN ports auto cross-over: |
|
| USB port(s): |
1 for storage devices |
| USB port type: | USB 3.0 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| MTU configurable (WAN): |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) VLAN tagging (802.1q) |
| Wireless | |
| Maximum Wireless Speed: | 6200 Mbps (Wi-Fi 6) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) 802.11ac (Wi-Fi 5) 802.11ax (Wi-Fi 6) |
| Wifi security/authentication: |
WPA (TKIP) WPA2 (AES) WPA3 |
| WiFi modes: | Access point |
| external antenna(s): | 6 |
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| MU-MIMO: |
|
| Dual Band (2.4GHz/5GHz): |
|
| Simultaneous Dual Band (2.4GHz/5GHz): |
|
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Alternate Admin URL: | http://www.routerlogin.net |
| Default admin username: | admin |
| Administration: |
Web-based (LAN) Mobile App |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Email alerts: |
|
| Diagnostic functions: |
ping |
| Misc hardware info | |
| RAM: | 512 Mb |
| Flash Memory: | 256 Mb |
| IPv6 support: |
|
| NTP client: |
|
| Links | |
| Product page: | https://www.netgear.com/home/wifi/router... |
| Datasheet: | https://www.netgear.com/media/RAX78_tcm1... |
| Manual: | https://www.downloads.netgear.com/files/... |
| Quick Install Guide: | https://www.downloads.netgear.com/files/... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|