The integrated access point complies with the IEEE 802.11n (draft 2.0) standard, providing wireless transmission rates of up to 300Mbps. It supports WEP and WPA/WPA2 wireless encryption. A WPS button allows for easy wireless security configuration.
The router provides VPN pass-through for IPSec. It features a built-in firewall to protect the network against intruders and Denial of Service (DoS) attacks.
| MBRN3000 Features | |
| General | |
| Availability: | currently available |
| Warranty: | 1 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 3G/4G USB port |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| USB port(s): |
1 3G USB modem |
| USB port type: | USB 2.0 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft 2.0) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) |
| WiFi modes: | Access point |
| external antenna(s): | 2 |
| WPS (Wi-Fi Protected Setup): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| Firewall | |
| DoS / DDoS protection: |
|
| Intrusion Detection System (IDS): |
|
| Device Management | |
| Default IP address: | 192.168.0.1 |
| Default admin username: | admin |
| Default admin password: | password |
| Administration: |
Web-based (LAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Links | |
| Product page: | http://support.netgear.com/product/mbrn3... |
| Manual: | http://www.downloads.netgear.com/files/G... |
| Quick Install Guide: | http://www.downloads.netgear.com/files/G... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|