The integrated access point complies with IEEE 802.11n (draft 2.0), providing wireless transmission speeds of up to 300Mbps. It can operate in AP and Repeater modes and supports WEP and WPA/WPA2 wireless encryption. The NP801n uses WMM (QoS) to prioritize the traffic over the network. A WPS button allows for worry-free wireless security configuration.
This router provides VPN pass-through for IPSec, L2TP and PPTP. It features a built-in SPI firewall to protect the network against Denial of Service (DoS) attacks.
| NP801n Features | |
| General | |
| Availability: | discontinued |
| List price: | $179 |
| Street price: |
$144 |
| Warranty: | 1 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
|
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft 2.0) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Repeater mode |
| external antenna(s): | 3 |
| ext antenna(s) removable ?: |
|
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| L2TP | |
| L2TP passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: | Domain/URL blocking, IP Address filtering, MAC Address filtering |
| Device Management | |
| Default IP address: | 192.168.20.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Diagnostic functions: |
|
| Misc hardware info | |
| NTP client: |
|
| Links | |
| Product page: | http://www.netcommwireless.com/product/w... |
| Datasheet: | http://www.netcomm.com.au/__data/assets/... |
| Quick Install Guide: | http://www.netcomm.com.au/__data/assets/... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|