The integrated access point complies with IEEE 802.11b/g standards, providing wireless transmission speeds of up to 54Mbps. It supports WEP and WPA wireless encryption and uses WMM (QoS) to prioritize the traffic over the network.
The NB9WMAXX supports a variety of VoIP features, such as Caller ID, Call Waiting and Echo Cancellation.
This router provides VPN pass-through for IPSec, L2TP and PPTP. A built-in SPI firewall protects the network against hackers and Denial of Service (DoS) attacks.
| NB9WMAXX Features | |
| General | |
| Availability: | discontinued |
| List price: | $299 |
| Street price: |
$201 |
| Warranty: | 1 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | DSL/ISDN/POTS connector (RJ-11) |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| RJ-11 FXS VoIP phone ports: | 2 |
| RJ-11 FXO VoIP PSTN wall jack port: | 1 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| Transparent Bridging (IEEE 802.1d): |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) IGMP Multicast (RFC 1112) |
| DSL | |
| DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) ADSL2+ (G.992.5) |
| PPPoE client: |
|
| PPPoA client: |
|
| VoIP | |
| VoIP Protocols: |
SIP v2 (RFC 3261) SDP (RFC 2327) RTP / RTCP (RFCs 1889/1890) |
| VoIP Audio Codecs: |
G.711 (PCM) G.723.1 G.729 (a/b) |
| VoIP Voice Features: |
Echo Cancellation (G.165/G.168) Caller ID Call waiting Call transfer Call forward |
| Wireless | |
| Maximum Wireless Speed: | 54 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) |
| Wifi security/authentication: |
WEP WPA (TKIP) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering |
| WiFi modes: |
Access point Wireless bridge (PtP) |
| external antenna(s): | 1 |
| WDS compatible: |
|
| WMM (QoS): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| L2TP | |
| L2TP passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: | IP Address filtering, MAC Address filtering, packet filtering |
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Quick Setup Wizard Telnet / CLI SSH |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Diagnostic functions: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.2 |
| NTP client: |
|
| Links | |
| Product page: | http://www.netcommwireless.com/product/v... |
| Datasheet: | http://media.netcomm.com.au/public/asset... |
| Manual: | http://media.netcomm.com.au/public/asset... |
| Quick Install Guide: | http://media.netcomm.com.au/public/asset... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|