cAP-2n supports 802.11b/g/n and can be powered by PoE. It can be used with the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location.
Unlike traditional controller software, which requires a separate PC/Mac to run, CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine.
Everything is included to get you started, wall/ceiling mount, PoE injector, power adapter and even the screws and screw anchors.
| RBcAP2n Features | |
| General | |
| Availability: | currently available |
| List price: | $49 |
| LAN / WAN Connectivity | |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| DHCP client: |
|
| Wireless | |
| Maximum Wireless Speed: | 150 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: | Access point |
| internal antenna(s): | 1 |
| Antenna gain: | 2 dBi |
| Transmit Power: | +11 dBm |
| Receiver Sensitivity: | -73 dBm |
| Default SSID: | MikroTik |
| Device Management | |
| Default IP address: | 192.168.88.1 |
| Default admin username: | admin |
| Default admin password: | n/a |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Misc hardware info | |
| Chipset: | AR9331-AL1A, 400Mhz |
| RAM: | 64 Mb |
| Power over Ethernet (PoE): |
|
| Links | |
| Product page: | http://routerboard.com/ |
| Datasheet: | http://www.speedguide.net/images/hardwar... |
| Quick Install Guide: | http://www.speedguide.net/images/hardwar... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|