It also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.
| mAP2nD Features | |
| General | |
| Availability: | currently available |
| List price: | $45 |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 2 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Wireless | |
| Maximum Wireless Speed: | 150 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| WiFi modes: | Access point |
| Transmit Power: | +18 dBm |
| Receiver Sensitivity: | -74 dBm |
| MIMO: |
|
| Device Management | |
| Default IP address: | 192.168.88.1 |
| Default admin username: | admin |
| Default admin password: | n/a |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Misc hardware info | |
| Chipset: | QCA9531 |
| RAM: | 64 Mb |
| Flash Memory: | 16 Mb |
| Power over Ethernet (PoE): |
|
| USB power cable: |
|
| Links | |
| Product page: | https://mikrotik.com/product/RBmAP2nD |
| Datasheet: | https://i.mt.lv/routerboard/files/mAP-17... |
| Quick Install Guide: | https://i.mt.lv/routerboard/files/mAP-qg... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|