The SP918NL is compliant with IEEE 802.11n and is backwards compatible with IEEE 802.11b/g. It supports 1T1R (1 transceiver, 1 receiver) technology to enhance data rate and wireless coverage.
This device can be easily configured via Web-based configuration utility.
| SP918NL Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| DHCP client: |
|
| Wireless | |
| Maximum Wireless Speed: | 150 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) RADIUS authentication |
| WiFi modes: | Access point |
| external antenna(s): | 1 |
| Transmit Power: | +15 dBm |
| WDS compatible: |
|
| Device Management | |
| Default IP address: | 192.168.2.1 |
| Default admin username: | admin |
| Default admin password: | 1234 |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Links | |
| Product page: | http://www.micronet.com.tw/ |
| Manual: | http://yummy.micronet.tw/up_images/engli... |
| Quick Install Guide: | http://yummy.micronet.tw/up_images/engli... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|