The access point is compliant with IEEE 802.11a/b/g/n. The new IEEE 802.11n standard provides transmission rates of up to 300 Mbps seamlessly in the 2.4GHz / 5.0GHz frequency spectrum.
The SP9018A supports MIMO (Multiple-In, Multiple-Out) technology, which uses 2T2R (2 transceiver, 2 receiver) to enhance data rate and wireless coverage.
| SP9018A Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 5 |
| LAN ports type: | Gigabit Ethernet (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| DHCP server: |
|
| DHCP client: |
|
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) SSID Broadcast disable |
| WiFi modes: |
Access point Wireless client Wireless bridge (PtP) Multipoint bridge (PtMP) Repeater mode |
| external antenna(s): | 2 |
| ext antenna(s) removable ?: |
 |
| Transmit Power: | +17 dBm |
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| Dual Band (2.4GHz/5GHz): |
|
| Firewall | |
| Filtering: | Domain/URL blocking, IP Address filtering, MAC Address filtering |
| Device Management | |
| Default IP address: | 192.168.2.1 |
| Default admin username: | admin |
| Default admin password: | 1234 |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Misc hardware info | |
| Power over Ethernet (PoE): |
|
| Links | |
| Product page: | http://www.micronet.com.tw/ |
| Quick Install Guide: | http://www.micronet.com.tw/mod/product/i... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|