The router provides wireless security - WEP, WPA, WPA2. A WPS button allows to easily establish connection with other WPS-enabled devices.
The router offers signal coverage control. It features one internal and one external high gain antennas.
R1's touch screen allows for quick and easy setup.
| R1 Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 2 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
|
| USB port(s): |
1 for storage devices |
| USB port type: | USB 2.0 |
| Wireless | |
| Maximum Wireless Speed: | 750 Mbps (Wi-Fi 5) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) 802.11ac (Wi-Fi 5) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) |
| WiFi modes: | Access point |
| internal antenna(s): | 1 |
| external antenna(s): | 1 |
| ext antenna(s) removable ?: |
|
| Antenna connector: | RP-SMA (Reverse SMA) |
| Antenna gain: | 2 dBi |
| Transmit Power: | +23 dBm |
| Receiver Sensitivity: | -89 dBm |
| WPS (Wi-Fi Protected Setup): |
|
| Device Management | |
| Default IP address: | 192.168.1.200 |
| Alternate Admin URL: | http://setup.loopcomm.com |
| Firmware upgradeable: |
|
| Links | |
| Product page: | http://www.loopcomm.com/product/r1/descr... |
| Datasheet: | http://www.loopcomm.com/support/R1/Datas... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|