| WRT110 Features |
| General
|
| Availability: |
currently available
|
| Street price: |
$47 |
| Warranty: |
1 year(s) |
| LAN / WAN Connectivity
|
| WAN ports: |
1 |
| WAN port(s) type: |
10/100 Base-TX (RJ-45)
|
| LAN ports: |
4 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
|
| USB port(s): |
0 |
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port forwarding of ranges: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| MAC Address clone: |
|
| MTU configurable (WAN): |
|
| MTU limit (WAN): |
1500 |
| DSL
|
| PPPoE client: |
|
| Wireless
|
| Maximum Wireless Speed: |
150 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft)
|
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) RADIUS authentication Wireless MAC Address filtering SSID Broadcast disable
|
| WiFi modes: |
Access point
|
| internal antenna(s): |
2 |
| Antenna gain: |
1 dBi |
| Default SSID: |
linksys |
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN
|
| |
IPSec |
| IPSec passthrough: |
|
| |
L2TP |
| L2TP passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| Firewall
|
| SPI firewall: |
|
| Filtering: |
IP Address filtering, MAC Address filtering, Proxy, Java, ActiveX, Cookie
|
| Device Management
|
| Default IP address: |
192.168.1.1 |
| Default admin username: |
(blank) |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Diagnostic functions: |
ping, traceroute |
| Links
|
| Product page: |
http://homesupport.cisco.com/en-us/wirel... |
| Datasheet: |
http://downloads.linksys.com/downloads/d... |
| Manual: |
http://homedownloads.cisco.com/downloads... |
| Quick Install Guide: |
http://downloads.linksys.com/downloads/q... |