| WAP54GX Features | |
| General | |
| Availability: | discontinued |
| Street price: |
$164 |
| Warranty: | 3 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| USB port(s): |
0 |
| Serial port: |
 |
| Wireless | |
| Maximum Wireless Speed: | 108 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11g+ (108 Mbps+) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) RADIUS authentication Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: | Access point |
| external antenna(s): | 3 |
| Transmit Power: | +19 dBm |
| Default SSID: | linksys |
| Device Management | |
| Default IP address: | 192.168.1.245 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard |
| Firmware upgradeable: |
 |
| Configuration backup/restore: |
|
| Event log: |
|
| Links | |
| Product page: | http://support.linksys.com/en-us/support... |
| Datasheet: | http://downloads.linksysbycisco.com/down... |
| Manual: | http://downloads.linksysbycisco.com/down... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
User Reviews/Comments:
rate:
avg:
by
aspAddict - 2006-11-07 12:15
I recently purchased one of these access points and the only problem I had with it was that the username was blank, not "admin". The password was exactly as I had set it, but for some reason the username was left blank.
Do NOT buy this if you want any kind of support. Yeah, it may be firmware upgradeable, but they haven't touched firmware updates for this thing since 2005 (original release). This unit will NOT work for allowing vpn clients to connect to work environments. In otherwords, no passthru... They are aware of this problem and there is a beta version of the firmware to deal with that, but if you load that beta firmware, you will create other problems. Linksys is too busy focusing on making other products than supporting the ones you paid good money for. Don't buy it!
|
|
|