The integrated access point can operate in two different modes, including access point and wireless bridge. It complies with the 802.11b/g standards and supports WEP and WPA/WPA2 wireless encryption to prevent unauthorized wireless access into your network.
The router supports VPN pass-through for IPSec, L2TP and PPTP, allowing you to establish up to 5 simultaneous IPSec tunnels. This router features a built-in firewall to protect your network from Denial of Service (DoS) attacks.
| WAG54G Features | |
| General | |
| Availability: | discontinued |
| Hardware revision: | v2 |
| Release Date: | 2005-01-01 |
| List price: | $199 |
| Warranty: | 1 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | DSL/ISDN/POTS connector (RJ-11) |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| DMZ: |
|
| Port forwarding: |
|
| Port forwarding of ranges: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| DNS proxy: |
|
| Dynamic DNS client: |
|
| UPnP: |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) |
| DSL | |
| DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) ADSL2+ (G.992.5) |
| PPPoA client: |
|
| DSL Line condition view: |
 |
| Wireless | |
| Maximum Wireless Speed: | 54 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) |
| Wifi security/authentication: |
WEP WPA (TKIP) |
| WiFi modes: |
Access point Wireless bridge (PtP) |
| internal antenna(s): | 0 |
| external antenna(s): | 1 |
| ext antenna(s) removable ?: |
|
| Default SSID: | linksys |
| Multiple SSID: |
|
| WDS compatible: |
|
| VPN | |
| RADIUS support: |
|
| IPSec | |
| IPSec server: |
|
| IPSec client: |
|
| IPSec passthrough: |
|
| IPSec simultaneous tunnels: | 5 |
| L2TP | |
| L2TP server: |
|
| L2TP client: |
|
| L2TP passthrough: |
|
| PPTP | |
| PPTP server: |
|
| PPTP client: |
|
| PPTP passthrough: |
|
| Firewall | |
| DoS / DDoS protection: |
|
| Filtering: | Domain/URL blocking, MAC Address filtering, keyword/content filtering, Java, ActiveX, Cookie |
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Remote configuration (WAN) |
| Firmware upgradeable: |
|
| Misc hardware info | |
| Flash Memory: | 8 Mb |
| SNMP support: | SNMP v.1 |
| NTP client: |
|
| Links | |
| Product page: | https://www.linksys.com/us/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
User Reviews/Comments:
rate:
avg:
by
anonymous - 2006-09-13 14:10
I got one of these and had a lot of problem getting it to work. ADSL and router functionality works fine (except the router can't manage broadcast of WOL packets).
The Wi-Fi is very poor. Not very powerful (avoid if you have thick walls). Moreover, connection keeps dropping when doing long file transfers. Go check linksysinfo.org for more details on problems encountered with this router
very good router for me!! but upgrade the firmware, the last official release is more stable (for wifi)
DSL Line condition view: YES! http://192.168.1.1/setup.cgi?todo=debug telnet 192.168.1.1 adslctl info --stats And u can try DD-WRT! |
|
|